Amprobe Multitest-1000 Continuity-Tester Bedienungsanleitung PDF herunterladen (Seite 40)

7. Press the START/STOP key. The instrument starts the test.

)

36.5

Ωm

0.93 Ω

t the end of the test the instrument

displays the values alongside.

Earth resistivity value

WARNING

Never disconnect the test leads while the word “Measuring” is being

displayed.

SAVE

SAVING

: The tests can be stored by pressing the SAVE key twice

(refer to paragraph 5.1).

Note

: If START/STOP key is pressed & held, the instrument takes more consecutive

tests.

8. When a new value is acquired the instrument emits a short sound and calculates the

new average value.

9. Press DISP key to show how many measurements are in average value

calculation and the measuring mode.

DISP

10. Press CLR key if you want to cancel the medium value of the resistance

and the no. of measurements which are included in the calculation.

CLR

Note

: Any test with result over 1999Ω is not inserted in the calculation of medium value.

Example: 1

measurement (D=1):

main display: 6,6Ωm

secondary display: 6,6Ωm

measurement (D=1):

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 121 122

Keine Kommentare

Amprobe Multitest-1000 Continuity-Tester Bedienungsanleitung Seite 40