Amprobe DMIII-Multitest Power-Quality-Recorder Bedienungsanleitung PDF herunterladen (Seite 26)

AMPROBE

DMIII MULTITEST

EN-24

6.2.3. Results of "TMR" mode



At the end of the test if

the Insulation

resistance is lower

than R

MAX

(see Table2)

and the instrument

generated the

Nominal test Voltage,

the instrument emits a

double beep

indicating the positive

outcome of the test

and displays a screen

similar to the screen to

the right.

M 05.06.01

Insulation Resistance

1.07 M

514V 15s

TMR 500V TIME:60s

Voltage during the Test

Duration of the Test

Test mode

FUNC

VNOM



The displayed result can be stored by pressing the SAVE key twice (according to

paragraph 9.1).



If the Insulation

resistance is higher

than R

MAX

(see Table2),

the instrument emits a

double beep at the end

of the test indicating

the positive outcome

of the test and displays

a screen similar to the

screen to the right.

M 05.06.01

Maximum resistance value

that can be measured

(999 is displayed if a

rated voltage of 500V was

selected, see Table2).

> 999 M

523V 15s

TMR 500V TIME:60s

The symbol ">" means that

the resistance value is

higher than R

MAX

Test duration

FUNC

VNOM





The displayed result can be stored pressing the SAVE key twice (according to

paragraph 9.1).

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 103 104

Kommentare zu diesen Handbüchern

Keine Kommentare

Amprobe DMIII-Multitest Power-Quality-Recorder Bedienungsanleitung Seite 26

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Amprobe DMIII-Multitest Power-Quality-Recorder