Amprobe AC71B Clamp-On-Multimeter Bedienungsanleitung PDF herunterladen (Seite 8)

6 7

Making Measurements

Measurement Functions

• AC and DC Volts See Figure -5-

• Resistance See Figure -6-

• Continuity & Diode See Figure -7-

• AC Current See Figure -8-

•

Additional Features

Auto Power Off See Figures -2- and -3-

The meter will automatically shut itself off after approximately 20

minutes after power is turned on, or no activity has occurred with

the meter. The meter will not beep when it turns off. Press the

ON/OFF button to reactivate the meter.

Auto Backlight See Figure -4-

The backlight illuminates the entire display for easy measurement

viewing in dark work environments. The backlight activates

automatically in low ambient light conditions.

Data Hold See Figure -9-

The Data Hold function allows the meter to capture and display a

measurement reading. When the reading has stabilized, press the

HOLD button and the reading will be locked on the display. The

data hold function is not available if ‘OL kΩ’ or no input signal is

displayed.

WARNING

Hazardous voltages present at test leads may not be

displayed when in HOLD mode.

Data Hold Beep Guard

The beeper will sound continuously and the backlight will ﬂash if:

1. The meter senses the signal of a different function.

2. The measured signal is 50 counts greater than the HOLD display

(5 AAC, 5 VAC, 5 VDC, 50Ω).

Auto Hold

The Auto Hold feature freezes the displayed ACA reading when

stable.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 95 96

Keine Kommentare

Amprobe AC71B Clamp-On-Multimeter Bedienungsanleitung Seite 8