Amprobe TMD-56 Betriebsanleitung Seite 1

Users Manual• Mode d’emploi• Bedienungshandbuch• Manual d’Uso• Manual de usoTMD-55 / TMD-55WMultilogger Thermometer / Wireless DownloadTMD-56Multilogg

3SYMBOLSCaution! Refer to the explanation in this ManualComplies with European DirectivesTested Comply With FCC StandardsDo not dispose of this pro

4and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferenc

5UNPACKING AND INSPECTIONYour shipping carton should include: 1 Meter 1 Manual 1 USB Cable (TMD-56) 1 Software CD ROM (TMD-56 / TMD-55W)

6THIRD display for T1- T2, TIME.DATA LOGGER function• Data logger capacity: Save data: 128 samples with read-time data. Data logger: 16 sets, Maximu

7• MAX/MIN/AVG/REL/HOLD function.• MAIN display for T1/T2.• SECOND display for T1/T2.• THIRD display for T1-T2, with real time clock and calendar.

8Setup ModePress the “SET[ ]” button in normal mode to switch to setup mode, the indicator “SET” is shown on the left side of the display. To switch b

9When the value of the main display exceeds the Hi limit, the word “Hi” will be displayed and the thermometer will beep in a pulsed tone. If the value

10Displays the current location of the read pointer within a selected group. The arrow buttons on the overlay are used for scrolling through the data

11erased). Press “HOLD” key again to resume recording and measurements. To prevent accidental loss of MIN, MAX and AVG data, the MAX/MIN function can

12“SAVE” Button (TMD-56 except)The save function stores the T1, T2 data in a nonvolatile memory. Press the “SAVE” button to save the current data, the

13point can be saved in one log session. Press the “LOG” button again to exit the data log function.“CLR ?” ButtonThe CLR function clears all the save

14“TYPE” Button (Second display)Press this key to change the type of thermocouple in the second display (K/J/T/E/R/S/N). If the inputs of the main and

15“APO” Button (Auto power off time setting, min. 1 minute)Use this function to change the time for the auto power off (APO) function. Press the “APO”

16Err-01: In the “SAVE” mode, if memory is full, the lower right display will show Err-01. If you would like to record the new value. Please clear all

17Accuracy:K/J/T/E-TYPE±(0.05% rdg + 0.3°C) -50°C to 1372°C±(0.05% rdg + 0.7°C) -50°C to -210°C±(0.05% rdg + 0.6°F) -58°F to 2501°F±(0.05% rdg + 1.

18GeneralDisplay Main, Second, Third: The Main and Second display panels are4 ½ digit liquid crystal display (LCD) with maximum readingof 19999, these

19Wire Communication Protocol19200 baud rate. (TMD-56) Wireless FeaturesFrequency range 910~920MHz (TMD-55W)Low current consumption less than 1mA.The

201. Power is supplied by 4pcs 1.5V (SIZE AAA) UM-4 R03.2. The “” appears on the LCD display when replacement is needed. To replace battery remove scr

TMD-55 / TMD-55WMultilogger Thermometer / Wireless DownloadTMD-56Multilogger Thermometer with USB DownloadUsers ManualJune 2010, Rev.1©2010 Amprobe T

Limited Warranty and Limitation of LiabilityYour Amprobe product will be free from defects in material and workmanship for 1 year from the date of pur

Non-Warranty Repairs and Replacement – US and CanadaNon-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools Servi

TMD-55T1 T2Multilogger Thermometerwith Wireless DownloadMultilogger ThermometerTMD-55 / TMD-55W / TMD-5614131112104163257891) “” Power Button2) “°C /°

10 111)Main display1.1)Degrees °C / °F1.2)Type of T/C thermocouple1.3)T1 or T2 temperature2)Second display2.1)Degrees °C / °F2.2)Type of T/C

1CONTENTSSYMBOLS ......3 UNPACKING AND INSPECTION ...

2“SAVE” Button ...............12 “LOG” Button ...............